Extreme Networks Summit WM - Changing Logs Levels and Enabling Syslog Event Reporting; Enabling;Disabling Poll Timer

Performing system maintenance
Summit WM Maintenance Guide, Software Version 5.380
Changing logs levels and enabling Syslog event
reporting
To change the log levels:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 In the System Log Level section, from the Summit Controller Log Level drop-down list, select the
least severe log level for the Controller that you want to receive: Information, Minor, Major,
Critical. For example, if you select Minor, you receive all Minor, Major and Critical messages. If
you select Major you receive all Major and Critical messages. The default is Information.
3 Click Apply.
4 From the Altitude AP Log Level drop-down list, select the least severe log level for the AP that you
want to receive: Information, Minor, Major, Critical. The default is Critical.
5 Click Apply.
Enabling/disabling poll timer
To enable/disable poll timer:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 To disable the poll timer, select the Disable Poll Timer checkbox in the Health Checking section.