Summit WM Maintenance Guide, Software Version 5.3 17
a In the FTP menu, press 8. The following screen is displayed.
Your choice: 8
Current Settings:
-----------------
ftp ip address: 192.168.10.10 port: 21
user name: tester
password: 123456
ftp directory: "backup_dir/"
ftp file: "gss-V4R0.0.50-rescue-user.tgz"
Press Enter to continue
9 To modify the FTP settings:
a In the FTP menu, choose options from 2 to 7 to individually set/change the FTP settings:
■ FTP server’s IP address
■ FTP port
■ User name
■ Password
■ FTP directory
■ File Name
10 To upload the image on the FTP server:
a In FTP menu, press 11. The following screen is displayed:
Your choice: 11
Attempting to upload an image to the ftp server. Please be patient
Please verify at the ftp server that image has successfully been uploaded
<< Press any key to return to previous menu. >>
NOTE
The minimum backup image size is around 250 MB.
11 Confirm whether the image is backed-up:
To confirm whether the image is backed up:
a In the FTP menu, press 9. The following screen is displayed:
Your choice: 9
{new screen comes up}
Currently stored backup images:
--------------------------------
1) Default Image: gss-V4R0.0.50-rescue.tgz
2) User Image: gss-V4R0.0.50-rescue-user.tgz
Press any key to return to previous menu
To Next Page
Loading...
