Summit WM Maintenance Guide, Software Version 5.3 27
Figure 1 depicts the graphical representation of the sequential steps for upgrading the software to V5R3
release via the Summit WM Controller’s GUI.
Figure 1: Graphical representation of sequential steps for upgrading the software from the past
releases to V5R3 via the Summit WM GUI
NOTE
The first step to upgrade the software to V5R3 is to backup the image of the existing software release. For more
information, see Chapter 1, “Backing up the existing image.”
NOTE
You must clean the browser cache before each upgrade. The browser caches the old Javascript files. If the upgrade
is attempted without cleaning the browser cache, the GUI may fail.
To clean the browser cache:
• Click Tools, point to Internet Options, and then select General.
• Click Delete Files. The Delete Files window opens.
• Select the Delete all offline content checkbox, and then click OK. The browser cache is cleaned.
To Next Page
Loading...
