Extreme Networks Summit WM - Performing the first time setup of the Summit WM Controller

Summit WM Maintenance Guide, Software Version 5.3 31
The following image is the graphical representation of the sequential steps for migrating the
configuration from a platform, running the V4R1 GP7 release, to another, running the V5R3 release.
Figure 2: Graphical representation of the sequential steps for migrating the configuration
To migrate the platform configuration:
1 Log on the Controller from which you want to migrate the configuration.
2 Export the controller configuration to a file by running the following CLI command.
NOTE
The string in the following example depicts the WM100 Controller.
SWM.extreme.com# export configuration
Filename (SWM.WM100.Extreme.13062007.132046):
Comment: <enter a comment here - optional>
Please wait...
Creating SWM.WM100.Extreme.13062007.132046...
Backup/Export complete.
3 Use the show backup command to list the current set of backup files.
4 Copy the file to an external FTP server by running the copy backup command.
NOTE
The string in the following example depicts WM100 Controller.
SWM.WM100.Extreme# copy backup <server name or IP address> <username> <destination
directory> <filename>
5 Type the password.