AVT 200HD Tuner • Installation 11
2. If this is the first time you have connected an AVT 200HD to this USB port on your
computer, the Found New Hardware Wizard opens. On the first screen, specify whether
you want the computer to connect to Windows Update in order to search the web
for the driver that it needs to communicate with the AVT via the USB port. (This is not
necessary if the USB driver already exists on your computer.)
Figure 10. Found New Hardware Wizard Opening Screen
• Select the Yes, this time only radio button if you want your computer to
connect to Windows Update only this one time.
• Select Yes, now and every time I connect a device if you want the computer to
automatically connect to Windows Update to search the web every time the AVT is
connected to this USB port.
• Select No, not this time if you do not want the computer to connect to Windows
Update to search the web at this time (for example, if the driver is already on your
computer).
To Next Page
Loading...