Extron electronics AVT 200HD - HTML Configuration and Control; Accessing the Web Pages

AVT 200HD Tuner • HTML Configuration and Control 74
HTML
Configuration
and Control
This section provides procedures for accessing and using the AVT embedded web pages. The
following topics are included:
• Accessing the Web Pages
• Special Characters
• System Status Page
• Configuration Pages
• File Management Page
• Control Pages
The AVT can be controlled and operated through its Ethernet port, connected via a LAN or
WAN and using a web browser such as Microsoft Internet Explorer
®
. The browser displays
the AVT web pages, which provide an alternative means of configuring and operating
the tuner. These factory-installed web pages are always available and cannot be erased or
overwritten.
NOTE: If your Ethernet connection to the tuner is unstable, try turning off the proxy
server in your web browser. To do this in Microsoft Internet Explorer, click
Tools > Internet Options > Connections > LAN Settings, clear the Use a
proxy server... check box, then click OK.
Accessing the Web Pages
Access the HTML pages as follows:
1. Start the web browser program.
2. Click in the browser Address field and enter the IP address of your AVT.
NOTE: If the local system administrators have not changed the value, use the
factory-specified default 192.168.254.254 in this field.
3. If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (/) following the IP address and the name of
the file to open.
NOTE: The browser Address field should display the IP address in the following
format: nnn.nnn.nnn.nnn/optional_file_name.html.