AVT 200HD Tuner • HTML Configuration and Control 80
Tuner Settings Page
On the Tuner Settings page, you can show or hide scanned channels, select the signal source
(over-the-air or cable), scan and hide channels, save and recall presets, select the output
resolution, and enable or disable front panel lockout (executive mode). To display the Tuner
Settings page, click the Configuration tab, then select the Tuner Settings link on the
left sidebar panel.
Figure 50. Tuner Settings Page
Set up your AVT 200HD for operation by making selections in the following sections on this
web page.
To Next Page
Loading...