AVT 200HD Tuner • Operation 17
Menu flow diagram
The following diagram shows the menus that are displayed in the front panel LCD window
and the order in which they appear when you repeatedly press the Menu button.
Power
On
AVT 200HD
VERSION X.XX
OUTPUT
CONFIGURATION
2 sec.
Menu
Menu
AUDIO
CONFIGURATION
Menu
30 sec.
VIEW
COMM SETTING
Menu
30 sec.
30 sec.
Default
Cycle
EXTRON
ELECTRONICS
2 sec.
Menu
Next
PRESS NEXT
TO EXIT
Menu
30 sec.
CHANNEL
SETUP
30 sec.
30 sec.
UNIT
RESET
Menu
Figure 14. AVT 200HD Menu Flow
NOTE: The menus time out and the default cycle is displayed after 30 seconds of
inactivity; however, any selections you made with the Adjustment knobs are
saved and remain in effect until you change them or reset the unit to factory
defaults (see “Unit Reset Menu (Resetting from the Front Panel),” later in
this section).
The following sections describe the submenu options for each of these menus.
To Next Page
Loading...