Extron electronics AVT 200HD - Page 54

AVT 200HD Tuner • Remote Configuration and Control 48
Command
ASCII Command
(Host to Tuner)
Response
(Tuner to Host)
Additional Description
Video Output (continued)
Select the display mode
E
M
X^
ASPR
}
Aspr M
X^]
Select display mode
X^
. For
X^
:
0 = fill
1 = follow
2 = zoom
View display mode
E
M ASPR
} X^]
Show the current display mode.
Select the tuning mode
(tune or preset)
EX1)
TVTM
}
Tvtm
X1)]
Place the AVT in tune or preset
mode
X1)
. For
X1)
:
0 = tune mode
1 = preset mode
View tuning mode
E
TVTM
} X1)]
Show the current tuning mode
for the AVT.
Video freeze
1F
Frz1
]
Freeze the video image.
Video unfreeze
0F
Frz0
]
Unfreeze the video image.
View freeze status
F
X1)]
Show current freeze status
X1)
. For
X1)
:
0 = video freeze off
1 = video frozen
Video mute
1B
Vmt1
]
Mute (blank) the video image.
Video unmute
0B
Vmt0
]
Unmute (show) the video image.
Video mute status
B
X1)]
Show video mute status
X1)
. For
X1)
:
0 = video unmuted
1 = video muted
On-screen display (OSD)
Introductory channel display
EX1)
TVOS
}
TVOS
X1)]
Show the introductory on-screen
display for 3 seconds after tuning
to a channel. For
X1)
:
0 = Do not display the OSD.
1 = Display the OSD for
3 seconds (default).
2 = Display only the current
channel information for
3 seconds.
View introductory channel
display status
E
TVOS
} X1)]
Show OSD introductory channel
information display status
X1)
.
Channel program guide
EX1)
TVPG
}
Tvpg
X1)]
Display the OSD program guide.
For
X1)
:
0 = program guide off
1 = program guide displayed
Move up program guide
E
+TVPG
}
Tvpg
]
Move the highlighting up
through the listed programs on
the OSD program guide.
Move down program guide
E
–TVPG
}
Tvpg
]
Move the highlighting down
through the program guide.
View program guide status
E
TVPG
} X1)]
Show status
X1)
of the program
guide.