USB drive and the jedi.img file is disappeared, it means the update is finished.
5, How to reset the recorded files name?
- After long time using, you will see the number of recording file become too big, for example
Encode_1080P_234, but you want it be start from Encode_1080P_0, to do it you just keep press
record button (before power on), then plug the power jack to power on the device, after 3 seconds,
the file number will start from 0.
6, How to record video from HDMI port of my computer?
- Please connect all the cables following the HDMI connection in manual firstly.
- If you have an extra monitor and can display the video correctly, please don’t care below settings
of video.
- If you have no extra monitor, please check your display selection of your computer. And it’s ok if
you find the picture as below:
- Please right click Sound icon, and select Playback device, and set EZCAP28X to be default
device. You will get recording video without audio if you don’t set this.
To Next Page
Loading...
