Please read the entire owner’s manual, including all safety information, before
plugging in or using this product. Failure to do so could result in fire, electric shock, or
serious personal injury.
Power
Plug the power cord into a 220-240V 50Hz outlet (see IMPORTANT SAFETY INFORMATION on
Pages 2 and 3). Make sure the outlet is in good condition and the plug is not loose. NEVER exceed
the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
Methods of Operation
The electric fire can be operated by the control panel located on the front of the unit or the remote
control. See figures below.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3.
To Next Page
Loading...
