Ezee Glow Celestial 36 - Three-Sided, Two-Sided, and Single-Sided Viewing Pre-Installation

9
Three-sided, two-sided, and single-sided viewing
Pre-installation
1.Remove the 8 screws from the top and bottom of the appliance (Fig. 3-1).
2.Install the 4 metal brackets (supplied) using the 8 screws previously removed (Fig. 3-2).
3. Remove the side trims and side panels from both sides of the appliance by removing the 12 screws
(Fig.3-3). Set the side trims, side panels, and screws aside.