5
High beam indicator
When the headlight uses a high beam,
this indicator lights up.
Low beam indicator
When the headlight uses a low beam
light, this indicator lights.
Ready
Lights up wh
en starting up, indicating
that the scooter is working properly and
can be ready to ride.
fault light
The electronic circuit detects that the
scooter is n
ot working properly, and this
warning light will stay on. When this
phenomenon occurs, please contact the
after-sales service network for system
diagnosis.
Battery warning light
This indicator light indicates that the
battery is low,
you need to use
the charger to charge the battery.
Multifunctional LCD instrument
1 2 3 4 5
1.TRIP（Interval meter）
2.ODO（odometer）
3. Riding mode
4.Speedometer（error code）
5. Battery percentage
This multifunctional LCD instrument
has the following function modes:
· Interval meter（TRIP）
S
hows the distance the scooter has
traveled so far this time.
· Odometer（ODO）
D
isplay the total distance traveled by
the scooter.
Tip: When the scooter is stopped, pinch
the rear brake grip, and then quickly
turn the throttle handle twice to make
the TRIP and ODO on the instrument
switch.
· Riding mode
Display the driving mode of the soccter
in front of you, there are ECO and Power
modes.
· Speedometer (fault code)
The real-time speed of the soccter is
displayed while riding. When a failure
occurs, the vehicle fault code will flash.
· Battery percentage
Displays the percentage of power
remaining in the current battery.
To Next Page
Loading...