Ezviz EB8 - Installation Steps

6
4� Installation Steps
The camera can be wall mounted and ceiling mounted.
Ceiling/Wall Mount
1.Pleaseseparatethemountingbaseandthecamerarst.
2.Removetheprotectivelmfromthelens.
3.
Place the drill template onto a clean and flat surface.
4. (For cement wall only) Drill screw holes according to the template, and insert the anchors.
5.Usescrewstoxthemountingbaseaccordingtothetemplate.
6. Mount the camera to the mounting base.
Drilling Template
Mounting Base
Screw
Anchor
Fig. 1 Ceiling Mount