Ezviz HB8 - 3. Installation Procedure

7
3� Installation Procedure
The camera can be wall mounted and ceiling mounted.
1. Pleaseseparatethemountingbaseandthecamerarst.
2. Removetheprotectivelmfromthelens.
3. Stickthedrilltemplateontoacleanandatsurface.
4. (For cement ceiling/wall only) Drill screw holes according to the template, and insert anchors.
5. Usescrewstoxthemountingaccordingtothetemplate.
6. Mount the camera to the mounting base.
Drilling Template
Anchor
Mounting Base
Screw
Ceiling Mount