These commands select readings in either GAUSS, TESLA or AMP-METERS, and flux density readings for either static fields (dc) or
alternating fields (ac). See Section 3 for more information.
:UNIT:FLUX:AC:GAUSs
Specifies ac flux density readings in gauss.
:UNIT:FLUX:AC:TESLa
Specifies ac flux density readings in tesla.
:UNIT:FLUX:AC:AM
Specifies ac flux density readings in amp-meters.
:UNIT:FLUX:DC:GAUSs
Specifies dc flux density readings in gauss.
:UNIT:FLUX:DC:TESLa
Specifies dc flux density readings in tesla.
:UNIT:FLUX:DC:AM
Specifies dc flux density readings in amp-meters.
:UNIT:FLUX?
Returns an ASCII string representing the present mode setting for the meter.
The ASCII string can be DC GAUSS, AC GAUSS, DC TESLA, AC TESLA, AC AM or DC AM.
To Next Page
Loading...
