Installing the rail lock brackets
The rail lock brackets help secure a quick-install rail kit-mounted platform to a rack.
1. Attach the rail lock brackets to each side of the unit using the rail lock screws that are included in the
kit.
2. Secure the rail lock brackets to the rack on each side of the unit using either the two 8-32 pan head
Philips screws that are included with the kit or screws provided by the rack manufacturer.
Use 18 to 20 inch-pounds (2.0 to 2.3 Newton-meters) of torque on these screws.
15
Setting Up the 2000/4000 Series Platform
To Next Page
Loading...