Section 6 | Marked cassettes dispensing methods
VEGA MB-97 has three different marked cassettes dispensing methods.
1) From Frontal chute (Standard device)
When a cassette is marked is it conveyed in a chute positioned at the from of the unit and
touching the supporting desk/table
2) Cassette Sorter
When the cassette is marked it is conveyed to a motorised collector positioned under the
chute. The capacity of this collector is of 25 cassettes. When the collector is full, it is pos-
sible to manually remove it and replace it with an empty one. A sensor positioned at the
back of the Sorter verifies the presence of any residual cassette.
The user can always command the manual/frontal delivery of a single cassette by select-
ing “Priority” or commanding it through a text file through the LIS.
3) Cassette DUO
When the cassette is marked it is conveyed in a motorised frontal cassette collector com-
posed by two trays, right and left.
Each tray has a capacity of 10 cassettes and when filled they must be removed. The sys-
tem will not start delivering cassettes until an empty tray has been inserted.
VEGA DUO can be positioned between two users.
To Next Page
Loading...