Electrical Safety
Mechanical Safety
FCC
Please be aware that degradation or loss of text printed text on FATech Cas-
settes may occur when they are subjected to solutions containing strong acids
for extended periods of time.
Decalcification processes of tissue in the FATech Cassettes involving strong
acids such as hydrochloric acids or nitric acids should always be validated by the
users prior to implementation.
The main power cord for the VEGA MB-97 Cassette Printer must be plugged into
earthed outlet only. Only use the power cord provided with this product
Be sure to position the VEGA MB-97 Cassette Printer to allow for easy removal
of the main power cord from the back panel.
Never attempt to operate the VEGA MB-97 Cassette Printer without the protec-
tive covers in place.
Never attempt to override any of the safety interlocks on the instruments.
Apart from a class 4 laser, the instrument contains moving machinery that may
cause damage to the user if the above advices are not followed.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his
own expense.
To Next Page
Loading...