Page 24
January, 2007
620/640 Operator And
624BLD Control Panel Installation Manual
THE 624 BLD CONTROL PANEL INSTALLATION INSTRUCTIONS
Wire other
safeties in
series here
Figure 4C. Typical jumpers needed for
testing purposes.
FAAC Strongly recommends the use of
reversing devices for a safe/UL listed
installation.
Figure 3C. Typical wiring diagram
using FAAC photo beams
(FAAC PART NUMBER 785163).
Wire other reversing devices in
series as shown here.
Figure 2C. 624 BLD Board Terminal
To Next Page
Loading...
