FAAC 844 T User Manual

7
ENGLISH
ENGLISH
CE DECLARATION OF CONFORMITY
Manufacturer : FAAC S.p.A.
Address: Via Benini, 1
40069 - Zola Predosa
BOLOGNA-ITALY
Declares that: Electronic control unit 844 T
•conforms to the essential safety requirements of the following directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Additional information:
This product underwent a test in a typical, uniform configuration (all products
manufactured by FAAC S.p.A.).
Bologna, 01 January 1997
The Managing
Director
A. Bassi

FAAC 844 T Specifications

General

Brand	FAAC
Model	844 T
Category	Control Unit
Language	English

Summary

CE DECLARATION OF CONFORMITY

GENERAL SAFETY OBLIGATIONS

TECHNICAL SPECIFICATIONS

844T LAY-OUT

Diagram showing the layout of the 844T electronic control unit.

ELECTRICAL CONNECTIONS WITH 400V 3ph

DESCRIPTION

J1 PLUG

Details on the J1 plug for connecting accessory cards like MINIDEC, DECODER, RP RECEIVERS.

TERMINAL BOARD J2 (low voltage)

Description of the J2 low voltage terminal board for inputs and accessories.

TERMINAL BOARD J3 (high voltage)

Terminal board for connecting the flashlight.

TERMINAL BOARD J4 (high voltage)

Terminal board for connecting the motor.

TERMINAL BOARD J5 (high voltage)

Terminal board for power supply connection.

SIGNALLING LEDS

Explanation of the six LEDs indicating terminal board input status.

PROGRAMMING

FAULT CONDITIONS

ROTATION DIRECTION CHECK

LIMIT SENSORS CONNECTION CHECK

ELECTRICAL CONNECTIONS WITH 230V 3ph