Need help?Do you have a question about the FAAC SDK EVO and is the answer not in the manual?
General| Brand | FAAC |
|---|---|
| Model | SDK EVO |
| Category | Control Unit |
| Language | English |
Identifies fuses, buttons, and main components on the E1SL board.
Explains the status indicated by different LEDs on the E1SL board.
Lists and describes the function of each terminal board connector.
Step-by-step guide for installing the DM board onto the E1SL board.
Instructions for connecting a second motor to the DM board.
Details how to assign operating modes using devices and programming.
Instructions for connecting motor M1 and its encoder to the E1SL board.
Refers to specific chapters for connecting various accessory devices.
Explains input programming, contact logic, and connection details.
Describes automatic opening, safety, and emergency inputs.
How to program and connect configurable outputs for status indications.
Overview of preliminary checks, power on, and the initial set-up process.
Details on performing the setup and restoring factory settings.
Guide to programming board functions via buttons or SDK EVO.
Configuration of speed, force, and deceleration for door movement.
Setting up obstacle detection and the low energy safety mode.
Configuration of pause times, date, time, and timed operating modes.
Enabling emergency battery and installing/configuring motor blocks.
Instructions for installing and enabling the elastic anti-panic kit.
Guide for installing dual technology entry/exit detectors.
How to install infrared detectors for opening safety.
Instructions for connecting and enabling XFA button photocells.
Steps for connecting and configuring boards in an intercom network.
Explanation of INTERLOCK, INTERLEAVES, and AIRSLIDE operational modes.
Procedures for firmware updates and file management via USB.
Explains the meaning of different LED indicators on the board.
Lists and explains automation status, error codes, and warnings.
Provides solutions for common operational issues not covered by error codes.
How to connect and install the LK EVO device.
Details on the lock device and LED error/warning coding.
How to connect and install the KS EVO device.
Describes the initial power-on sequence and LED indicators.
Features of the SDK EVO lock device and password protection.
Overview of the SDK EVO home page and button functions.
Explains how to access and navigate through the SDK EVO menus.
Summary of all available functions accessible via the menus.
Detailed explanation of each menu item from Language to Info.
To Next Page
