FAAC E045 User Manual

E045
E045

FAAC E045 Specifications

General

Brand	FAAC
Model	E045
Category	Control Unit
Language	English

Summary

CE Declaration of Conformity

Manufacturer Information

Details manufacturer, company name, address, product description, and model.

Compliance Directives and Standards

Lists ECC directives and harmonised standards the product conforms to.

Warnings for the Installer

General Safety Obligations

Provides 25 essential safety rules for installation and product use.

Meaning of Symbols

Explains symbols used for safety and product operation.

Technical Specifications

Electrical and Environmental Data

Details power supply, current, motor load, temperature, fuses, time, and connectors.

Preparing for Installation

Safety Precautions Before Installation

Emphasizes cutting power, separating cables, and ensuring proper earthing.

Board Layout

Component Identification Diagram

Illustrates and labels board components, connectors, and indicators.

LED Indicators and Connectors

Describes the function of various LEDs and board connectors.

Electrical Connections

Mains Power Supply Connection

Details wiring for the primary 230V power supply.

Motor and Flashing Lamp Connection

Explains how to connect motors and the flashing lamp.

Command and Safety Device Inputs

Describes connections for OPEN, STOP, and other input devices.

Accessories Power and Output Connections

Details wiring for accessory power and outputs like indicator lights and electric locks.

BUS-2EASY Accessories

BUS-2EASY Photocell Configuration

Explains photocell modes and connection requirements.

BUS-2EASY Photocell Address Assignment

Details setting dip-switches for photocell addressing.

BUS-2EASY Encoder Connection

Explains how to connect and address BUS-2EASY encoders.

Encoder LED Status and XF Module

Details encoder LED behavior and XF module connection.

Programming

Accessing and Exiting Programming

Describes how to enter and leave the programming menu.

Basic Programming Steps

Outlines the sequence for basic programming functions.

Advanced Programming Steps

Outlines the sequence for advanced programming functions.

Basic Programming Functions

Explains default settings and available function logics.

Pause Times and Motor Count

Configures pause times and the number of motors used.

Motor Power, Encoder, and Delay Settings

Adjusts motor power, encoder usage, and closing leaf delay.

BUS-2EASY Entry and Dead-man Modes

Configures BUS-2EASY device entry and dead-man drive modes.

Automated System Status and Exit

Defines status codes and procedures for exiting programming.

Advanced Programming Functions

Reverse and Ram Stroke Settings

Configures reverse and ram strokes for lock release and latching.

Opening Leaf Delay and Deceleration

Adjusts delay for leaf 2 opening and deceleration for both leaves.

Pre-flashing, Anti-crushing, and Contact Point Settings

Configures pre-flashing, anti-crushing sensitivity, and contact point search.

BUS-2EASY Device Installation

BUS-2EASY Device Entry Procedure

Details the steps to add BUS-2EASY devices to the system.

Checking BUS-2EASY Status and Connections

Explains how to verify device entry and connection status.

Time Learning - Setup

Preparing for Setup Procedure

Outlines prerequisites and safety for the setup process.

Performing the Setup Procedure

Details the step-by-step process for setting up the system.

Testing the Automated System

Explains how to verify system operation and safety compliance.

Memorising Radio Controls

SLH/SLH LR Radio Control Memorization

Step-by-step guide for programming SLH/SLH LR radio controls.

LC/RC Radio Control Memorization

Step-by-step guide for programming LC/RC radio controls.

DS Radio Control Memorization

Details how to program DS radio controls using dip-switches.

Deleting All Radio Controls

Explains the procedure to erase all memorized radio codes.

Start-Up and LED Checks

LED Status Interpretation

Describes how to interpret LED indicators for system status and errors.

Errors and Alarms

Error Codes and Solutions

Lists error codes, their meaning, and recommended solutions.

Alarm Codes and Solutions

Lists alarm codes, their meaning, and recommended solutions.

Troubleshooting Common Issues

Diagnosing and Resolving Operational Problems

Provides solutions for common gate operation problems.

Managing Configuration Files via USB

USB File Management Overview

Explains how to transfer configuration and management files.

Board Software Upgrade

Details the process for updating the board's software using a USB drive.

Configuration and Radio Code Management

Covers upgrading configuration, radio codes, and downloading settings.

Board Radio Code Download

Details saving radio codes to a USB memory.

Function Logics Explained

Logic Overview Table

Summarizes various function logics and their behavior.

Semi-Automatic and Step-by-Step Logic Details

Details the behavior of Semi-Automatic and Step-by-Step logics.

Automatic Safety and Standard Automatic Logic Details

Details the behavior of Automatic Safety and Standard Automatic logics.

Step-by-Step and Semi-Automatic "B" Logic Details

Details the behavior of Step-by-Step and Semi-Automatic "B" logics.

Dead-Man Logic Details

Details the behavior of the Dead-Man logic.