FAAC E045 - CE Declaration of Conformity; Manufacturer Information; Compliance Directives and Standards

E045 2 732786 - Rev.C
8.8.
VOLTAGE
HIGH
AREA
C
B
A
1
ENGLISH
CE DECLARATION OF CONFORMITY
The manufacturer
Company name:
FAAC S.p.A. Soc. Unipersonale
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares that the following product:
Description: control board
Model: E045
conforms to the essential safety requirements of the following ECC directives:
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Directive ROHS 2 2011/65/EU
Furthermore, the following harmonised standards have been applied:
EN 60335-1:2012 + A11:2014 - EN 61000-6-2:2005 - EN 61000-6-3:2007 + A1:2011
Additional note: this product underwent tests in a typical uniform configuration (all products
manufactured by FAAC S.p.A.).
Bologna, January the 1
st
2016 CEO
·
· Interrupt the electrical power supply
before working on the control unit. The
protection cover (1) needs to be installed
before switching on the power supply.
F