Need help?Do you have a question about the FAAC E844 3PH and is the answer not in the manual?
General| Brand | FAAC |
|---|---|
| Model | E844 3PH |
| Category | Control Unit |
| Language | English |
Details and specifications for correct system operation and safety.
Requirements for wearing personal protective equipment.
Safety measures for installers to prevent accidents and damage.
Guidelines for proper storage of the product to maintain its condition.
Instructions for safe and compliant disposal of packaging and product.
Specifies the intended applications and purpose of the E844 3PH board.
Outlines prohibited uses and modifications of the product.
Lists prohibited uses and conditions for the E844 3PH.
Details how to identify the product, including codes and firmware version.
Provides detailed technical data and features of the E844 3PH board.
Requirements for the electrical system, including safety and compliance.
Lists the necessary tools and equipment for installation.
Explains connections for push-buttons and other control inputs.
Description of the two open collector outputs and their activation.
Explanation of the failsafe functional test and its purpose.
How to connect opening and closing limit switches for correct operation.
Instructions for connecting and enabling the flashing light indicator.
Information on connecting radio receiver or decoder boards.
How to connect the three-phase electric motor to the board.
Guidance on connecting the board and gearmotor to the earth system.
Instructions for connecting the mains power supply to the board.
Details on how to access and modify programming functions and settings.
Instructions to restore all programming functions to their default settings.
Procedures for performing final checks on forces and system functionality.
Steps for closing the enclosure housing the control board.
Final operations and verification of system delivery requirements.
Details on connecting and using closing photocells for safety.
How to connect and configure sensitive edges for safety functions.
Specific instructions for connecting and addressing BUS 2easy photocells.
Instructions for connecting and configuring BUS 2easy sensitive edges.
Guide to assigning addresses to control devices using DIP switches.
How to check the firmware version of the control board.
Information on the current status of the automation system.
Explains alarm and error codes for troubleshooting.
How to interpret the status of the LEDs on the control board.
Lists essential routine maintenance operations for reliable system performance.
To Next Page
