Need help?Do you have a question about the FAAC E1SL and is the answer not in the manual?
General| Model | FAAC E1SL |
|---|---|
| Category | Control Unit |
| Max Output Current | 1 A |
| Outputs | 2 |
| Operating Temperature | -20 °C to +55 °C |
Identifies the main board and its components.
Explains the status LEDs on the board.
Details terminal boards and their connector assignments.
Step-by-step guide for DM board installation.
Explains various automation operating modes.
Wiring diagram for motor and encoder.
How to program configurable inputs.
Configuration of safety and emergency inputs.
How to program configurable outputs.
Detailed steps for the setup procedure.
Steps to perform setup and reasons for failure.
How to restore factory settings.
Step-by-step guide for basic programming.
Step-by-step guide for advanced programming.
Adjusting opening/closing speed, force, and ramps.
Configuring obstacle detection sensitivity.
Guidelines for Low Energy mode and intrusion response.
Configuring energy saving and timing parameters.
Activating operating modes via programmed time bands.
Programming timer bands for days of the week.
Programming timer bands for specific dates.
Details on the emergency battery kit.
Installation and programming of the motor block.
To Next Page
