950N 4 732773 - Rev. B
ENGLISH
7 PROGRAMMING
To enter programming mode, when the monitor is displaying the day-date-time, press either p or q .
Programming is divided into main menus (see Diagram 1) arranged by subject.
Once the menu has been selected using p or q , press OK to access it.
Each menu is divided into various level sub-menus for setting parameters.
Use thep or q keys to select the submenu or parameter and OK to conrm.
An asterisk on the display indicates the currently active setting.
To exit programming, select “exit” at each level; as an alternative, after approximately 2 minutes the display will
automatically return to standard visualisation.
Following are the ow charts and notes describing the various menus and programming options.
Diagram 1: Main programming menu
DAY TIME
VER DATE
LANGUAGE
SETUP
PROGRAMMING
TIMER
TIMER
CLOCK
ADVANCED MENU
DIAGNOSTICS
LOCK
To Next Page
Loading...
Need help?
General
