Need help?Do you have a question about the FAAC E124S and is the answer not in the manual?
General| Power supply voltage for accessories | 24 V DC |
|---|---|
| Operating temperature | -20°C to +55°C |
| Operating Voltage | 230 V AC |
| Functions | Automatic closing, pedestrian opening, stop/reverse |
| Outputs | motor output |
| Inputs | Safety devices, open, close commands |
| Power supply voltage | 230V AC ±10% 50/60Hz |
Covers configuration of basic functions, automation type, logic, and pause times.
Explains settings for speed, encoders, limit switches, and delays.
Covers BUS 2easy registration, motor operation, and exiting programming.
Details advanced settings for motor force, thrust, lock, and leaf delays.
Configures anti-crushing sensitivity and programmable output functions.
Covers advanced obstacle detection and photocell configurations.
Outlines the setup process, required checks, phases, and operation modes.
Configures basic and advanced programming settings for movement and timing.
Configures obstacle detection and anti-crushing system adjustment functions.
Guides on installing radio modules and memorizing XF FDS and SLH/SLH LR controls.
Details memorization of LC/RC, DS radio controls and code deletion.
Explains configuration of control devices, encoders, and registration process.
Guides on installing Simply Connect modules and enabling communication.
Lists error codes, alarms, motion timeouts, and BUS 2easy device faults.
To Next Page
