FAAC E124S - MAINTENANCE; Cycle Counter, Maintenance Request, and Factory Reset

E124S 36 532434 - Rev.A
Translation of the original instructions
ENGLISH
76
Radio code memory
full
The radio memory is full.
Simply Connect allows you to delete
any unused radio codes. Use and ad-
ditional MiniDec/DECODER/RP module
if necessary.
80
Safeties in opening
disabled
The opening safety devices have been
disabled (via Simply Connect).
81
Safeties in closing
disabled
The closing safety devices have been
disabled (via Simply Connect).
82
Opening sensitive
edge disabled
The opening sensitive edges have been
disabled (via Simply Connect).
83
Closing sensitive
edges disabled
The closing sensitive edges have been
disabled (via Simply Connect).
86
(i) BUS 2easy dis-
connected
BUS 2easy disconnected (via
Simply Connect).
87
BUS 2easy device
registration in pro-
gress
A registration procedure is in progress.
90
Programming in
progress
Programming in progress, e.g. mainte-
nance (via Simply Connect).
99
Control board data
deletion
All data on the E124S has been deleted.
RESET
Press the RESET button lightly with a thin screwdriver.
- The RESET LED lights up and the board is restarted.