FAAC E124S - Fasten the Enclosure; Install the Cover

5 6
E124S 9 532434 - Rev.A
2
3
x 4
x 4
1
∅ 5 mm
Translation of the original instructions
ENGLISH
OPENING TO THE
RIGHT
cover
cover enclosure
enclosure
Fasten the enclosure
Reinstall the cover
OPENING TO THE
LEFT
FASTEN THE ENCLOSURE
1. (5) Remove the 4 screw caps ( ∅ 5 mm holes).
2. Mark the fixing points on the support, drill the holes
and secure using suitable screws and dowels, lastly
inert the screw caps.
3. Insert the cable conduits. Tighten the cable glands
and make sure they are tight.
INSTALL THE COVER
(6) Insert the hinges for opening towards the left
or right.