FAAC S418 - S418 Operator; 1. DESCRIPTION AND SPECIFICATION

To Next Page

To Previous Page

FAAC Model S418 Swing Gate Operator

The FAAC Model S418 automated system for swing-leaf gates is an electro-mechanical operator which transmits its

movement to the gate leaf by means of a worm-screw system.

The irreversible system guarantees mechanical locking of the leaf when the motor is not operating. An easy-to-use

release device permits movement of the leaf in case of malfunction or a power outage.

The adjustable rear bracket permits the operator to be installed on most existing gate applications.

Fig. 1

Fig. 2

1. DESCRIPTION

Model S418 Swing Gate Operator

• Correct operation is only guaranteed when using authorized FAAC accessories, safety devices and control

units.

• The S418 automated system has been designed and constructed to control vehicle access in residential

units. Any other use must be avoided.

1.1 DIMENSIONS

32 ½

13¾

4¼

Dimensions in Inches

Part Description Part Description

1 Operator 6 Power Cable

2 Release Device 7 Front Bracket

3 Mechanical Stop at Closing 8 Adjustable Rear Bracket

4 Mechanical Stop at Opening 9 Rear Fitting

5 Cable Cover

Other manuals for FAAC S418