EasyManua.ls Logo

FAAC S800H User Manual

FAAC S800H
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
S800H
Question and Answer IconNeed help?

Do you have a question about the FAAC S800H and is the answer not in the manual?

FAAC S800H Specifications

General IconGeneral
ModelS800H
CategoryGate Opener
Power220W
Max Leaf Weight800 kg
Max Leaf Length4 m
Operating Frequency50/60 Hz
Operating Temperature-20°C to +55°C
Power Supply230V AC
Motor Voltage230 Vac

Summary

CE Declaration of Conformity

Installer Safety Obligations

Critical safety rules for installation personnel to prevent harm and ensure correct product use.

Product Description and Specifications

Technical Specifications

Details technical parameters: power, protection class, operating temp, oil type.

Electrical Preparations

Illustrates wiring for motors, photocells, control units, and accessories for system setup.

Operator Installation Guide

Installation Without Mechanical Release

Step-by-step guide for installing the operator without a mechanical emergency release.

Installation With Mechanical Release

Instructions for installing the operator with an optional mechanical emergency release mechanism.

Operational Adjustments and Manual Use

Mechanical Travel-Limit Stops

Explains internal mechanical stops for opening/closing and their adjustment.

Travel-Limit Stop Adjustment

Procedure for setting and verifying internal mechanical travel-limit stops for gate movement.

Final Operations and Safety

Covers final steps like cable length and safety signage placement.

Manual Operation Procedures

Instructions for manual gate operation, including hydraulic and mechanical release.

Maintenance and System Bleeding

Hydraulic Release Operation

Procedure for manually moving the gate during power outages via hydraulic release.

Optional Mechanical Release

Details the use of an optional mechanical release device for manual gate operation.

Hydraulic Circuit Bleeding

Guide to remove air from the hydraulic circuit for correct operation and noise reduction.