Need help?Do you have a question about the FAAC 740 and is the answer not in the manual?
General| Max Gate Weight | 500 kg |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP44 |
| Model | 740 |
| Motor Voltage | 230 Vac |
| Pinion Module | 4 |
| Limit Switch Type | Magnetic |
| Power Supply | 230V AC |
Essential safety rules for safe installation and use of the automated system.
Illustrates the relationship between use frequency and work time for the gearmotor.
Instructions for connecting the standard electrical system.
Important checks to perform before starting the installation process.
Steps for preparing the foundation and performing mechanical setup.
Instructions for correctly attaching the rack to the gate.
How to connect the control board to the system components.
Guidance on setting the mechanical and electronic limit switches.
Procedures for verifying the correct operation of the automated system.
Instructions on how to operate the system manually in case of power failure.
Steps to revert from manual operation back to automated mode.
Recommended maintenance schedule for the system.
Guidance on seeking professional repairs for the system.
List of optional accessories that can enhance the system's functionality.
Basic safety guidelines for users of the automated system.
A brief description of the 740-741 automated system.
Explanation of different operating logics and functions.
User-level advice on maintaining the system and obtaining support.
Essential safety regulations for installers.
Safety precautions related to the control board.
Technical data for the control board.
Diagram and identification of control board parts.
General guide to electrical connections for the control board.
Specifics for the power supply terminal board.
Details for connecting motors and the flashing lamp.
Information on connecting accessories to the terminal board.
Instructions for connecting specific receivers.
Details for connecting limit switches via rapid connector.
Information on connecting the encoder using a rapid connector.
Steps for configuring fundamental system parameters.
Instructions for setting advanced system functions.
How to verify the status of system inputs.
Final checks to ensure the system functions correctly.
To Next Page
