Need help?Do you have a question about the FAAC 770 N and is the answer not in the manual?
General| Model | 770 N |
|---|---|
| Max Leaf Weight | 500 kg |
| Power Supply | 230V AC (+6% -10%) 50 (60) Hz |
| Motor Voltage | 24 Vdc |
| Operating Temperature | -20°C to +55°C |
| Opening Time | 15 s |
| Safety Devices | Encoder |
| Maximum Leaf Width | 4 m |
| Voltage | 230V |
Details necessary electrical preparations and cable specifications for standard system installations.
Illustrates the maximum operation time based on usage frequency for 230V motors.
Provides the formula to calculate the usage frequency (%F) of the automated system.
Specifies required cable diameters for 24V motors based on distance to the control board.
Essential checks before installation, focusing on structural integrity and leaf suitability.
Step-by-step guide for positioning and securing the underground supporting box for the operator.
Instructions for preparing and mounting the gate leaf to the automated system.
Details the process of installing the gearmotor unit into the supporting box.
Guides the user through making the necessary electrical connections for the system.
Information on installing a kit for 180-degree leaf rotation, with compatibility notes.
Information on installing a kit for 140-degree leaf rotation, noting limitations.
Explains the function and installation of an encoder for obstacle detection.
Details the magnetic limit switch kit for controlling leaf stopping points.
Describes mechanical limit stops used to replace manual beats for leaf movement.
To Next Page
