Need help?Do you have a question about the FAAC 741 and is the answer not in the manual?
General| Operating Temperature | -20°C to +55°C |
|---|---|
| Protection Class | IP44 |
| Speed | 12 m/min |
| Maximum Leaf Width | 3 m |
| Safety Devices | Photocells, safety edges |
| Power Supply | 230V AC |
| Motor Type | Asynchronous |
| Control Options | Remote control |
Essential safety instructions for installers to ensure safe operation and prevent harm.
Provides a description of the gearmotor and its key technical specifications.
Details the physical dimensions of the gearmotor with diagrams.
Explains how to establish maximum work time based on use frequency.
Details the electrical connections for a standard system setup.
Covers preliminary checks, foundation, and mechanical installation.
Detailed instructions for assembling the steel rack, welded or screwed.
Covers control board connection, earthing, unit, and limit switch positioning.
Procedures for testing the automated system after installation.
Instructions for manual operation and returning to normal automated mode.
Guidelines for regular system maintenance and available accessories.
Covers general safety rules and a description of the automated system.
Details manual operation, restoration, maintenance, and accessories.
Crucial safety instructions for installers to prevent harm.
Safety precautions, technical specifications, and layout of the control board.
Details how to make electric connections to the control board.
Details power supply terminal board connections.
Details connections for motors and flashing lamp.
Details connections for accessories.
Instructions for rapid connection of Minidec, Decoder, and RP receivers.
Instructions for rapid connection of limit switches.
Instructions for rapid connection of the encoder.
Guide to accessing and setting basic programming functions.
Guide to accessing and setting advanced programming functions.
How to check the status of inputs via LEDs.
To Next Page
