Need help?Do you have a question about the FAAC 780D and is the answer not in the manual?
General| Model | 780D |
|---|---|
| Category | Gate Opener |
| Max Gate Weight | 800 kg |
| Power Supply | 230V AC |
| Motor Voltage | 24 Vdc |
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP44 |
Essential safety instructions for installers covering safe use, handling, and precautions.
Overview of the system's purpose, operation, and key technical data.
Guidance on establishing maximum work time based on operational frequency for optimal performance.
Essential pre-installation checks for gate suitability, soil stability, and electrical provisions.
Instructions for preparing and installing the foundation plinth and plate for the operator.
Procedures for physically mounting the operator and connecting mechanical components.
Detailed steps for attaching the rack to the gate, including welding and screwing methods.
Instructions for fitting chain pinions for Z16 or Z20 versions of the 844 system.
Critical safety precautions before performing work on the control board.
Detailed electrical and operational parameters of the 780D control unit.
Identification and description of the control board's connectors, LEDs, and other components.
Guidance on wiring photocells, safety devices, motors, lamps, and power supply.
Specific wiring instructions for J7 (Power), J6 (Motors/Lamp), and J1 (Accessories).
How to access and configure fundamental system functions using basic programming mode.
Detailed configuration options for advanced system behavior and parameters.
Adjusting motor thrust force and gate opening direction parameters.
Configuring final braking, pre-limit, and post-limit switch deceleration.
Configuring encoder presence, photocell logic, and function logic for gate behavior.
Setting the maximum work time and the number of system operation cycles.
Finalizing all electrical hookups to the control board, including earthing.
Defining gate direction and setting limit-switch positions for proper operation.
Procedures for installing MLS and inductive limit switches on the rack.
Verifying the status of system inputs via LED indicators.
Setting the mechanical clutch for torque control and safety.
Applying safety stickers and completing the final installation steps.
How to operate the gate manually in case of power failure or system malfunction.
Process for re-engaging the gate's automated operation after manual use.
Instructions for housing and installing the CN 60E safety edge control unit.
Guidance on installing the 578D remote control board separately from the operator.
Instructions for installing the 462DF control board using an adapter kit.
Recommended checks and intervals for maintaining system efficiency and safety.
Step-by-step guide for safely disassembling the transformer and board unit.
Procedures for checking and topping up the oil level in the operator.
Information on contacting authorized centers for system repairs.
Basic rules for safe behavior around the automated system to prevent accidents.
Overview of the system's design, operation, and key features for vehicle access control.
Steps to manually operate the gate during power outages or system malfunctions.
Process for re-engaging the gate's automated operation after manual use.
To Next Page
