Need help?Do you have a question about the FAAC 746 and is the answer not in the manual?
General| Absorbed Power | 300W |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP44 |
| Motor Voltage | 230 Vac |
| Voltage | 230V AC |
| Power | 300W |
| Power Supply | 230V AC |
| Usage | Residential |
| Gate Type | Swing |
Provides critical safety guidelines and warnings for installers to prevent accidents and product damage.
Details the electromechanical operator's features, design, and technical specifications for the 746 series.
Explains the duty cycle curve, defining maximum working time based on duty cycle percentage.
Provides physical dimensions and illustrates the standard electrical setup and connections for the automation.
Covers preliminary checks, base plate, and mechanical installation steps.
Instructions for attaching racks and mounting chain pinions for gate automation.
Steps for connecting power, accessories, and understanding the control unit's components.
Detailed explanation of connector J1 and terminal blocks J2-J8 for system inputs/outputs.
Programming logic via dipswitches and understanding fault conditions and alarms.
Setting travel stop plates and adjusting the anti-crushing torque for safe operation.
Final checks and tests to ensure the automation operates correctly after installation.
Procedures for manual gate operation and reverting to electronic control.
Routine maintenance checks, oil topping, and guidance on contacting for repairs.
Essential safety rules for users to avoid accidents and ensure proper use of the gate automation.
Overview of the FAAC 746 automation for vehicle access, its components, and basic functions.
Instructions for manual gate operation during power failure or malfunction.
Steps to restore normal electronic operation after manual gate movement.
To Next Page
