Faber INCA LUX INLX21SSV2 User Manual

13
Install the Insert Hood into the cabinet opening, and fully engage the spring-
loaded Side Mount Clips onto the cabinet wood base.
Next from underneath the Insert as shown in Figure A, locate the screw in
each of the Side Mount Clips.
To lock the Insert Hood into position, tighten the screw for each of two Side
Mount Clips.
2
A
2x
Two people may
be required for
installation.

Faber INCA LUX INLX21SSV2 Specifications

General

Brand	Faber
Model	INCA LUX INLX21SSV2
Category	Ventilation Hood
Language	English