Need help?Do you have a question about the Faber INCA PRO PLUS and is the answer not in the manual?
General| Brand | Faber |
|---|---|
| Model | INCA PRO PLUS |
| Category | Ventilation Hood |
| Language | English |
Guidance to prevent range top grease fires during cooking.
Steps to take and precautions to avoid injury during a grease fire.
Prohibits use of solid-state speed control devices with the fan.
Instructions for proper unit use, servicing, and general safety.
Caution regarding ventilation use for hazardous or explosive materials.
Adherence to codes, standards, and preventing utility damage during installation.
Recommendations for efficient ductwork performance, including length and sealing.
Discourages flexible ductwork due to reduced performance and turbulence.
Mandates the use of metal ductwork to reduce the risk of fire.
Warning against venting exhaust air into enclosed spaces like attics or crawl spaces.
Recommendations for cold weather installations, including dampers and thermal breaks.
Mandatory rules for venting system termination outside the home.
Details the required 120V, 60Hz AC-only electrical supply on a 15 amp circuit.
Specifies copper wire, National Electrical Code, and local ordinances.
Instructions for connecting the power supply cable via a wiring box and conduit connector.
Critical safety information regarding electrical grounding and potential shock hazards.
List of main product components included with the rangehood.
List of optional accessories available for purchase.
Diagram and components for the in-line blower kit installation.
Diagrams and components for remote blower kits (RB900/RB1200).
Diagrams and components for internal blower kits (IB1200, IB300/IB600).
General instructions for setting up the rangehood for recirculating air.
Step-by-step guide for installing the IB300/IB600 internal blower.
Installation steps for the duct plate, side trims, and blower bracket divider.
Connecting the motors and wiring harness for the IB1200 blower.
Installing dampers and duct transition for the IB1200 unit.
Connecting ducting and testing electrical connections after installation.
Installing the plate, second wiring box, and routing the remote blower cable.
Installing side trims and connecting internal wiring for remote/in-line blowers.
Connecting ducting and testing electrical connections after installation.
Prepare cabinet opening and mount hood using spring brackets.
Secure hood with screws and place stoppers for stability.
Connect power supply leads (white, black, ground) to the rangehood.
Connect ductwork to damper and perform power-on checks.
Install charcoal filters and describe replacement procedure.
Install grease rail and baffle filters using knobs and screws.
Details on Light and Blower control buttons and their operation.
Tips for best results, cleaning filters, and lighting unit maintenance.
Details on what the warranty covers and how to get service.
List of items not covered and limitations of the warranty.
To Next Page
