Facnor FD110 - 8- Furling Tips

Facnor
–
FlatDeck furlin
g
& reefin
g
systems
–
Installation manual
11- FURLING TIPS
When you reef, check the Genoa car to ensure the correct tension on the leach and foot.
Keep the Genoa halyard tight when furling in and out.
It is recommended that you have a spare sail on board. You can use an old Genoa with a
luff tape to fit the Facnor groove.
Before leaving your boat, make sure that the sail is tightly furled and that the jib sheets
are wrapped around the furled sail two or three times, and the reefing line is secured.
When reefing in light airs, maintain some tension on the jib sheets to ensure the sail is
properly rolled up.
DO NOT FORCE the reefing system. Check for reasons if the sail is difficult to furl.
Please do not hesitate to contact our experienced sales team or the
FACNOR dealers whose list is available on our web site :
www.facnor.com
and discover the wide range of FACNOR products.
ENJOY YOUR SAILING !
www.facnor.com
32
English