Need help?Do you have a question about the Factor O2 and is the answer not in the manual?
Provides a high-level guide to the assembly process, emphasizing professional assembly.
Provides instructions on how to correctly measure, cut, and finish the fork steerer tube.
Covers final steps for headset compression plug, top cap, and barstem alignment.
Details cleaning, applying Loctite, and pressing in the bottom bracket cups.
General| Wheel Size | 700c |
|---|---|
| Groupset Compatibility | Electronic and Mechanical |
| Frame Material | Carbon |
| Groupset | Shimano Dura-Ace Di2 |
| Wheelset | Black Inc. (depending on build) |
| Brakes | Disc Brakes |
| Handlebar | Black Inc Integrated Barstem |
| Frame | O2 VAM or O2 (depending on model) |
| Fork | Full Carbon, Tapered Steerer |
| Headset | Integrated |
| Bottom Bracket | CeramicSpeed |
| Tire Clearance | Up to 30mm |
| Bottom Bracket Type | PressFit 30 |
| Seatpost | Black Inc. (depending on build) |
To Next Page
