FAE VRTMT 8 - Language Setting Procedure; Changing the Display Language; Chiller Operating Parameters; Accessing Chiller Parameters Menu

11
LANGUAGE SETTING
From any screen of the operating menu press the key to visualize the language set.
To change the language press and move with the arrows until it reaches the
language to set among the following available languages: English – Italian – German –
French – Spanish – Russian [available only with OLED display].
Press again the key to save the setting.
The asterisk at the right bottom indicates the language set.
Press to return to the sate menu.
OPERATING PARAMETERS MENU - CHILLER
The operating parameters menu can be accessed from any visualization of the state menu, by pressing together
the keys + (hold the key pressed and press the key ).
The menu windows include the menu name and the corresponding [identifying
code].
The second line of the display is dotted.
• Press the key to access the parameters of the visualized menu;
• Press the key to return to the state menu;
• Press the key to go to the next menu;
• Press the key to return to the previous menu.
PARAMETERS READING AND EDITING
The parameters windows display the name of the parameter, the [identifying code]
of the corresponding menu, the value of the parameter and the unit of measure.
• to go to the parameter below;
• to go to the parameter above.
To change the value of the parameter press , the arrow and the value of the
parameter in brackets mean that the system is in the parameter editing mode, edit
the value by pressing the following key:
• to increase the value
• to decrease the value
• to save.
• to return to the parameter;
-
>(English)
*
LANG.
LANG.
English
*
CHILLER
[
IC
]
-----------------------
COOL 1 SET.
CHILLER
13.0
P1
[IC]
bar
CHILLER
-
>(13.0)
P1
[IC]
bar