Need help?Do you have a question about the FAE VRTMT 8 and is the answer not in the manual?
Guide on how to change the device language.
Steps to load default configurations for the controller.
Steps to adjust the duty cycle parameters.
Checks before installation and warranty details.
Instructions for proper disposal of the equipment.
Overview of the VRTMT controller's capabilities and applications.
Explanation of the product coding system and its positions.
Detailed technical specifications of the VRTMT controller.
Guidelines for physically mounting the regulator.
Instructions for wiring the controller and power supply.
Interpretation of the LED indicators for status and errors.
Diagram illustrating the terminal board layout and connections.
Detailed description of each terminal and its function.
Description of the controller's front panel interface and keys.
How to navigate and understand the device's status screens.
Explanation of the information displayed in status windows.
Guide to changing the display language.
Accessing and navigating chiller operating parameters.
How to read and modify parameter values.
Parameters for the cooling cycle in Chiller mode.
Parameters for the heating cycle in Chiller mode.
Accessing and navigating Dry Cooler operating parameters.
How to read and modify parameter values.
Parameters for the cooling cycle in Dry Cooler mode.
Parameters for the heating cycle in Dry Cooler mode.
Accessing and navigating Slave operating parameters.
How to read and modify parameter values.
Working parameters for the Slave mode.
Setting maximum speed limits for noise reduction or fixed speed.
Function to prevent ice formation using sprayers.
Accessing and using the factory parameters menu.
Loading predefined settings presets for the controller.
Manually set or auto-detect cos-phi and speed limits.
Ramp time and resonance suppression settings.
Minimum jump window voltage settings.
Enables the internal relay based on default settings.
Controls solenoid valves/sprayers based on relay values.
Splits load into subgroups using contactors.
Address, baud rate, parity, stop bits.
Max time to receive setting value via Modbus.
Adapts load adjustment to external air temperature.
Displays total operating days and hours.
Displays internal temperature in centigrades.
Quantity of stops due to power supply phase loss.
Functions for weekly clock and calendar settings.
General| Category | Controller |
|---|---|
| Output Current | 8A |
| Operating Temperature | -20°C to +60°C |
| Model | VRTMT 8 |
| Protection | Overload, Short Circuit |
To Next Page