EasyManua.ls Logo

Faema SMART / S - Worker Operating Procedures; Operational Dispensing

Faema SMART / S
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 EN
English
BEFORE YOU START
Groups
Hook up the ¿lter holders to the groups (without coffee).
Let each group dispense water for about a minute.
Hot water
Continuously dispense hot water (pressing the appropriate button) until at least 6 litres of water
have been dispensed for a machine with 2 groups (see the “Hot water dispensing” chapter in the
User’s Manual).
Steam
Dispense steam from the nozzles for about a minute, using the appropriate buttons.
DURING OPERATION
Steam dispensing
Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds and
let the steam escape so that condensation is eliminated.
Coffee dispensing
If the machine has not been used for more than an hour, before using the hot water, dispense
about 100 cc and discard the liquid.
Hot water dispensing
If the machine has not been used for more than an hour, before using the hot water, dispense
about 200 cc and discard the liquid.
Cleaning the coffee circuits
Please read the speci¿c section in the user’s manual to learn how to clean these circuits.
WARNING: BEFORE YOU START OPERATING THE MACHINE, WASH THE INTERNAL
COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED BELOW.
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE MA-
CHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.
6. Rules for the worker operating the machine

Related product manuals