Fagor 3FE-8112 Instruction Manual

103 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

3FE-8112

Lavadoras

Washing machines

Máquinas de lavar roupa

PT

ES

EN

¡Lea detenidamente este manual antes de usar el aparato!

O aparelho apenas deve ser iniciado após tomar conhecimento do manual!

Before using the appliance, please carefully read this manual!

Manual de instrucciones

Manual de instruções Instruction manual

PT

ES

EN

IO-WMS-1615 (10.2019)

Other manuals for Fagor 3FE-8112

Quick Start Guide2 pages

Questions and Answers:

T
Troy PerryAug 19, 2025
Why my Fagor Washer does not start?
- C
  Chris AndersonSep 12, 2025
  If your Fagor Washer doesn't start, there could be several reasons: * The machine might not be plugged in, so ensure it is properly connected to a power outlet. * The fuses could be faulty, requiring replacement. * There might be no mains power supply, so check the power source. * The Start/Pause button might not have been pressed, so press it to initiate the cycle. * The program dial might be in the 'stop' position, so turn it to the desired program. * The machine door might not be completely closed, so ensure it is securely shut.
S
shannonbarnesAug 21, 2025
Why is my Fagor 3FE-8112 vibrating?
- V
  Victor HernandezAug 21, 2025
  If your Fagor Washer vibrates, it might be due to several reasons: * The feet may not have been adjusted, so ensure they are properly leveled. * The transit bolts used for transportation might not have been removed, so remove them. * The load in the drum might be too small, though this will not prevent operation. * The machine might be overloaded or the laundry unevenly spread, so avoid overloading and distribute the laundry evenly. * The machine might be resting on a hard surface, so avoid placing it on such surfaces.
C
Crystal WoodardAug 23, 2025
What does E01 error mean on Fagor Washer?
- J
  Jennifer EvansAug 23, 2025
  If your Fagor Washer displays the error code E01, it indicates that the door of your machine is not shut properly. Ensure the door is completely closed until you hear a click. If the error persists, turn off your machine, unplug it, and contact an authorized service agent immediately.
N
Natasha WilliamsAug 26, 2025
What does E02 error mean on Fagor Washer?
- J
  jennifermillerAug 26, 2025
  If your Fagor Washer displays the error code E02, it means the water pressure or water level inside the machine may be low. Check that the tap is fully turned on, as the mains water may be cut off. If the problem continues, the machine will stop automatically. Unplug the machine, turn off the tap, and contact an authorized service agent.
A
Angela CruzAug 27, 2025
What does E03 error mean on Fagor Washer?
- S
  Steven JacksonAug 27, 2025
  If your Fagor Washer displays error code E03, the pump is faulty, the pump filter is clogged, or the electrical connection of the pump is faulty. Clean the pump filter. If the problem persists, contact an authorized service agent.
P
Penny RodriguezAug 29, 2025
Why is my Fagor 3FE-8112 not taking in water?
- M
  Monica BishopAug 29, 2025
  If your Fagor Washer isn't intaking water, check these possible causes: * The water tap might be turned off, so ensure it is on. * The water inlet hose might be twisted, so check and untwist it. * The water inlet hose might be clogged, so clean the filters. * The inlet filter might be clogged, so clean it. * The machine door might not be completely closed, so close it properly.
S
seth91Sep 1, 2025
What to do if my Fagor 3FE-8112 does not discharge water?
- S
  stewartdanielSep 1, 2025
  If your Fagor Washer isn't discharging water, consider the following: * The drain hose might be clogged or twisted, so check, clean, or untwist it. * The pump filter might be clogged, so clean it. * The laundry might be too tightly packed, so spread it evenly in the drum.
D
davisjasonSep 3, 2025
How to reduce excessive foam in Fagor 3FE-8112 detergent drawer?
- A
  Anne ArcherSep 3, 2025
  If you see excessive foam in the detergent drawer of your Fagor Washer: * You might be using too much detergent. To stop the foam, press the Start/Pause button, dilute one tablespoon of softener into 1/2 liter of water, pour into the detergent drawer, and press the Start/Pause button again after 5-10 minutes. * You might be using the wrong detergent. Only use detergents specifically produced for automatic Washing Machines.
S
Sara WilliamsSep 5, 2025
Why does the spin cycle not start on my Fagor Washer?
- D
  david00Sep 5, 2025
  If the spin cycle of your Fagor Washer is delayed or doesn't occur, it's likely because the Unbalanced load control system has been activated. This system attempts to spread your laundry evenly. Once the laundry is spread, the spinning cycle will begin. For future washes, load the drum evenly to prevent this.
K
Kristen ChapmanSep 7, 2025
Why does my Fagor 3FE-8112 discharge water as soon as it is loaded?
- G
  Gregory Hughes Jr.Sep 7, 2025
  If your Fagor Washer is loaded with water and immediately discharges it, ensure that the end of the water drain hose is at a suitable height for the machine.

Fagor 3FE-8112 Specifications

General

Appliance placement	Freestanding
Loading type	Front-load
Colour of product	White
Built-in display	Yes
Door hinge	Left
Drum material	Stainless steel
Rated capacity	8 kg
Maximum spin speed	1200 RPM
Spin-drying class	B
Washing class	A
Number of washing programs	15
Delayed start timer	Yes
Delay start (max)	24 h
Energy efficiency class	A+++
Height	85 cm
Noise Level (Wash)	58 dB
Noise Level (Spin)	76 dB
Weight	68 kg
Width	60 cm
Depth	600 mm

Related product manuals

Preview: Fagor 3FE-8812

Preview: Fagor 3FE-8612

Preview: Fagor 3FE-8212

Preview: Fagor 3FE-8612X

Fagor 3FE-8612X

Preview: Fagor 3FE-8812X

Fagor 3FE-8812X

Preview: Fagor 3FE-8314IT

Fagor 3FE-8314IT

Preview: Fagor 3FE-7212

Preview: Fagor 3FE-7112

Preview: Fagor 3FE-9814X

Fagor 3FE-9814X

Preview: Fagor 3FE-7314IT

Fagor 3FE-7314IT

Fagor FFT-309-311-313