To Next PageTo Next PageWhy is my Fagor 3FE-8314IT Washer not working?
If your Fagor Washer isn't working, try the following: Ensure the water supply tap is open, clean the mesh filter on the supply hose, make sure the door is completely closed, and press the Start/Pause button.
What to do if my Fagor Washer appliance is vibrating?
If your Fagor Washer is vibrating, check the following: * Ensure that the transit bolts have been removed. * Level the washing machine. * Lock the washing machine feet by tightening the nuts.
What to do if my Fagor Washer has water leakage?
If you notice water leakage from your Fagor Washer, make sure that you properly connect the water supply hose.
What to do if my Fagor Washer does not drain properly?
If the water in your Fagor Washer isn't draining correctly, check the pump filter and the drain hose. Also, ensure the drain hose is positioned at a height of 0.6 to 1 meter from the floor.
Why is my Fagor 3FE-8314IT Washer not filling with water?
If your Fagor Washer isn't filling with water, make sure the water valve is open. Also, check the program settings, water pressure, and ensure the water supply hose is correctly reconnected. Verify that the door is closed and that the water intake hose isn't bent or blocked.
What to do if my Fagor Washer load has not been spun?
If the load in your Fagor Washer hasn't been spun, try to replace the load evenly in the drum and clean the pump filter.
What to do if my Fagor 3FE-8314IT Washer shows error E30?
If your Fagor Washer displays error code E30, check that the door is fully closed and that no clothing is caught in the door.
What to do if my Fagor 3FE-8314IT Washer shows error E21?
If your Fagor Washer shows the error code E21, examine the water drain pump and filter.
What to do if my Fagor 3FE-8314IT shows error E10?
If your Fagor Washer displays error E10, open the water valve, inspect the water inlet hose and filter, and verify the water pressure, as the error indicates low water pressure or no water in the washing machine.
Why does my Fagor Washer have simultaneous water intake and draining?
If your Fagor Washer is experiencing simultaneous water intake and draining, verify that the end of the drain hose is positioned higher than the water level inside the appliance. The hose should be at a height of 0–100 cm.
General| Type | Front-loading |
|---|---|
| Washing capacity | 8 kg |
| Maximum spin speed | 1400 RPM |
| Energy efficiency class | A+++ |
| Weight | 68 kg |
| Water Consumption | 9900 liters/year |
| Programs | Cotton, Synthetics, Wool, Rinse, Spin |
