100
THE FAULT INDICATOR LIGHTS
The washing machine has an alarm system, which helps solving minor problems connected with inco-
rrect operation by means of “ERROR CODES” indicated in the display. With the ERROR CODES you
can locate the defect and establish the cause.
If an error is found, the display shows information in accordance with the following table:
While signaling an error washing machine also beeps
(if active).
Display
indication
Reason Explanation
E10 Low water pressure,
no water in the
washing machine.
Open the water valve, check the water inlet hose and
filter, check water pressure
E21 Water does not drain
properly
Check water drain pump and filter.
E30 The door is not
closed.
Check, if the door of the washing machine is closed.
Check, if no clothing is stuck in the door of the washing
machine.
Others Try to restart or contact the SERVICE CENTRE.
To Next Page
Loading...
