53
OPERATION
Timer Duration setting can be changed at any time. During cooking, select the cooking zone
for which you wish to change timer duration setting, i.e. activate it with the sensor, touch the
Timer sensor and change the time setting as per Timer setting instructions.
You can check the remaining cooking time at any time. Touch the Timer sensor; active
Timer duration for a selected cooking zone is indicated by a ashing indicator light next to the
display.
When the set cooking time has elapsed, you will hear an alarm beep. Touch any sensor to turn
it o The alarm goes o automatically after 2 minutes.
To cancel the Timer touch (heat setting indicator will be brighter), then touch and hold
for 3 seconds and touch to activate the desired cooking zone, then touch and use
to reduce the time to “00” (see the chapter on how to set the timer for instructions how to set
single minutes and tens of minutes).
Kitchen Timer
Timer function can be used as an independent kitchen timer, which does not control any
of the cooking zones. To set a kitchen timer, follow all the steps of Timer setting, but do
not select any of the cooking zones, i.e. immediately after activating the hob touch the
Timer sensor and set the time. Kitchen timer activation will be indicated with a ashing in-
dicator light above the sensor. Cancel the timer in the same way as you cancel the timer
for a selected cooking zone.
To Next Page
Loading...
