EasyManua.ls Logo

Fagor 3IF-ZONE96C4S - User Manual

Fagor 3IF-ZONE96C4S
68 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ES
Placa de inducción
3IF-ZONE96C4S
Manual de instrucciones
EN
Induction hob
¡Lea detenidamente este manual antes de usar el aparato!
Before using the appliance, please carefully read this manual!
Instruction manual
ES
EN
IO-HOB-0978 / 8506546 (07.2020 V5)

Questions and Answers

  • D
    Derrick BrownAug 10, 2025
    Why does my Fagor 3IF-ZONE96C4S Hob appliance switch itself off?
    • B
      Bianca DaviesAug 10, 2025
      Your Fagor Hob might be switching off automatically because no sensor field has been touched for 10 seconds after activation. To prevent this, switch on the appliance and set the heat setting without delay. Another possible reason is that the sensor fields are covered or dirty, so uncover or clean them.
  • D
    David ReeseAug 16, 2025
    Why aren't the sensor fields on my Fagor 3IF-ZONE96C4S Hob responding to touch?
    • S
      simmonsdianeAug 16, 2025
      If the sensor fields on your Fagor Hob aren't responding, it could be due to several reasons: - The appliance might not be turned on, so ensure it is switched on. - You may be touching the sensor field too briefly (less than one second); try touching it for a longer duration. - You might be touching multiple sensors simultaneously; make sure to touch only one sensor field at a time (except when switching off a cooking zone).
  • K
    kathy76Aug 22, 2025
    What to do if my Fagor 3IF-ZONE96C4S Hob doesn't respond and beeps?
    • S
      Scott SchmidtAug 22, 2025
      If your Fagor Hob is unresponsive and beeping, it might be due to improper use, such as touching the wrong sensor fields or touching them too briefly. In this case, reconnect the hob. Another possibility is that the sensor fields are covered or dirty; uncover or clean them.
  • N
    nancy28Aug 28, 2025
    What does it mean if a single cooking zone on my Fagor Hob switches off?
    • C
      Cynthia Hayes MDAug 28, 2025
      If a single cooking zone on your Fagor Hob switches off and the residual heat indicator "H" is displayed, it could be due to a limited cook time; try switching the cooking zone on again. It might also be caused by covered or dirty sensor fields, so ensure that you uncover or clean the sensor fields. Another reason could be that electronic components overheated.
  • M
    Mary JacksonSep 3, 2025
    Why is the residual heat indicator off on my Fagor 3IF-ZONE96C4S when the cooking zones are hot?
    • M
      Mrs. Marie ReidSep 3, 2025
      If the residual heat indicator on your Fagor Hob is off even though the cooking zones are hot, it's likely due to a power outage or the appliance being disconnected. The residual heat indicator will reappear the next time the appliance is turned on and off again.

Fagor 3IF-ZONE96C4S Specifications

General IconGeneral
TypeInduction
Width96 cm
Number of zones4
Control typeTouch control
ColorBlack
Total Power7.4 kW
Boost FunctionYes
Installation TypeBuilt-in
MaterialGlass ceramic
Safety FeaturesChild lock
Dimensions960 x 520 mm

Related product manuals