OPERATION
To exit into SETTINGS from the LANGUAGE
menu use the sensors to select
and touch
To immediately exit from the LANGUAGE
menu and switch the appliance to standby
mode, simultaneously touch and .
Time
Use the sensors to select TIME and
touch
TIME menu
Use the sensors to select the required
item and touch
Clock type
Select the clock type menu and touch . The
following items will be available:
Use the sensors to make your choice
in the menu and touch to
-
pliance and the TIME upper level menu is
automatically displayed.
The selected clock type will now appear in
the upper right corner of the display and dur-
ing standby.
Select the menu and touch
. The following items will be available:
- 24h,
Use the sensors to make your choice of
time format and touch -
lection is stored by the appliance and the TIME
upper level menu is automatically displayed.
This option is only available for a digital clock.
Minute Minder
When you select the and
touch , the appliance will display the time
in the following format: 00:00.
When the appliance is in standby you can
also access Minute Minder when you touch
and then .
MINUTE MINDER
If no changes are made within 5 seconds, the
appliance enters standby mode.
Touch the sensors to adjust minute
minder in 1 minute steps. Touch
and start the countdown.
Touch the sensor to adjust the minute
minder setting during countdown.
When the time has elapsed, a beep will sound
54
To Next Page
Loading...
